Icom IC-910H - Satellite Operation; Satellite Communications Basics

46
7
SCANS
n Programmed scan operation
Scans specified frequency range, programmed in the
memory channel 1A/1b, 2A/2b and 3A/3b. Before start-
ing the programmed scan, scan edges should be pro-
grammed in these channels.
D Selecting scanning range
qPush[M/S•BAND]or[SUB]toselectthedesired
frequency band to be scanned.
w Push [SET] then [SCAN .] to enter the scan set
mode.
e Push [DN Z] or [Y UP] to select the programmed
scan item.
 •“P-SCAn”isdisplayed.
r Rotate the tuning dial to select the desired scan-
ning range from 1A-1b, 2A-2b and 3A-3b.
 •Push[M-CL5]for1sec.toreturntothedefaultsetting.
t Push [SCAN .] to exit from the scan set mode.
wSelect
mode.
qSelect VFO
mode.
eStart.
rStop.
D Starting the programmed scan
qPush[M/S•BAND]or[SUB]toselectthedesired
frequency band to be scanned.
w Push [V/M 1] to select VFO mode.
e Select the desired operating mode.
 •Theoperatingmodecanalsobechangedwhilescan-
ning.
r Push [SCAN .] to start the programmed scan.
 •“SCAN”indicatorashes.
 •Thetuningstepsettingisusedforthescanningstep.
 •1kHzor1MHztuningstepcanalsobeusedasthe
scanning step.
t Push [SCAN .] to cancel the scan.
If the same frequency is programmed into the scan
edge memory channel 1A and 1b, 2A and 2b or 3A
and 3b, programmed scan does not start.
F M
VFO A
60dB
S C A N
S
1
3 5
7
9
20
40
Flashes while scanning
n Memory scan operation
Scans programmed memory channels only. Blank
channels and programmed scan edge channels
(1A/1b, 2A/2b and 3A/3b) are not scanned.
qPush[M/S•BAND]or[SUB]toselectthedesired
frequency band to be scanned.
w Push [V/M 1] to select memory mode.
e Push [SCAN .] to start the memory scan.
 •“SCAN”indicatorashes.
 •
Pushing[SPCH•LOCK]for1sec. during scan starts
modeselectscanand“LOCK”indicatorappears.(p.47)
r Push [SCAN .] to cancel the scan.
qSelect memory
mode.
wStart.
eStop.
MEMO
60dB
S C A N
S
1
3 5
7
9
20
40
Flashes while scanning