Icom IC-910H - Frequency and Mode Settings

20
4
BASIC OPERATION
n Operating band selection (optional UX-910 is required)
The IC-910H can be used on the additional 1200 MHz
band with the optional UX-910. The operating band
canbeselectedbypushing[M/S•BAND]for1sec.
D Selecting on the MAIN band
q Push [SUB] to cancel the SUB band access, if re-
quired.
wPush [M/S•BAND] for 1sec. to select operating
band.
NOTE: The same operating band cannot be as-
signed on both MAIN and SUB bands, simultane-
ously.
D Selecting on the SUB band
q Push [SUB] to enable the SUB band access.
 •“SUB”indicatorappears.
wPush [M/S•BAND] for 1sec. to select operating
band.
[SUB] [M/S•BAND]
F M
VFO A
VF O A
S 1 3
5
7
9 20
40
60dB
60dB
S
1
3 5
7
9
20
40
Select 1200 MHz to MAIN band.
F M
VFO A
VF O A
F M
S U B
S 1 3
5
7
9 20
40
60dB
60dB
S
1
3 5
7
9
20
40
Select 1200 MHz to SUB band.