Icom IC-910H - Scan Set Mode; Memo Pad Set Mode; Compressor Set Mode

64
10
SET MODE
n Scan set mode
n Memo pad set mode
Programmed scanning range
Select the programmed scan range from 1A-1b, 2A-
2b and 3A-3b.
•1A-1b :Scanswithintherangeprogrammedin
the memory channel 1A and 1b.
•2A-2b :Scanswithintherangeprogrammedin
the memory channel 2A and 2b.
•3A-3b :Scanswithintherangeprogrammedin
the memory channel 3A and 3b.
S C A N S C A N
Scan resume condition
Select the scan resume condition from ON and OFF.
•on  :Scanresumes.
•oFF :Scancancelswhenasignalisreceived.
S C A N S C A N
Number of memo pad channels
Select the number of memo pad channels available
from 5 and 10.
•5 :5memopadchannelscanbeused.
•10:10memopadchannelscanbeused.
n Compressor set mode
Compression level
Adjust the compression level for the speech compres-
sor to the desired level within 0–100% range.
COMP
Scanning speed
Select the scanning speed from high and low.
S C A N S C A N
Scan type HI Lo
Memory scan (Mode select) 20 CH/sec. 10 CH/sec.
Prog. scan (TS<1 kHz) 50 steps/sec. 25 steps/sec.
Prog. scan (TS>1 kHz) 20 steps/sec. 10 steps/sec.
Tone scan 20 steps/sec. 10 steps/sec.