Icom IC-910H - FM Set Mode

60
10
SET MODE
n FM set mode
Offset frequency for 144 MHz
Set the offset frequency for duplex (repeater) opera-
tion within 0–10.00000 MHz range.
This item is displayed when the 144 MHz band is ac-
cessed, including the SUB band access capability.
• Default value: 0.6000
F M
Offset frequency for 430(440) MHz
Set the offset frequency for duplex (repeater) opera-
tion within 0–10.00000 MHz range.
This item is displayed when the 430(440) MHz band
is accessed, including the SUB band access capa-
bility.
• Default value: 5.0000
F M
Offset frequency for 1200 MHz
Set the offset frequency for duplex (repeater) opera-
tion within 0–100.00000 MHz range.
This item is displayed when the 1200 MHz band is
accessed, including the SUB band access capability.
• Default value: 20.0000
F M
Tone encoder frequency for 144 MHz
(except Europe, Sweden and Italy versions)
Select tone encoder frequency for accessing a repeat-
er, etc. from one of 50 available tone frequencies.
This item is displayed when the 144 MHz band is ac-
cessed, including the SUB band access capability.
• Default value: 88.5
F M
T
Tone encoder frequency for 430(440) MHz
(except Europe, Sweden and Italy versions)
Select tone encoder frequency for accessing a repeat-
er, etc. from one of 50 available tone frequencies.
This item is displayed when the 430(440) MHz band is
accessed, including the SUB band access capability.
• Default value: 88.5
F M
T
Tone encoder frequency for 1200 MHz
(except Europe, Sweden and Italy versions)
Select tone encoder frequency for accessing a repeat-
er, etc. from one of 50 available tone frequencies.
This item is displayed when the 1200 MHz band is
accessed, including the SUB band access capability.
• Default value: 88.5
F M
T