Icom VHF IC-F50

11
2
PANEL DESCRIPTION
MDC CALL KEY (MDCoperationonly)
➥ Push to enter the MDC menu selection mode. Then select
the desired MDC menu from “SELCALL,” “MSG,” “STATUS,”
“RADIOCHK”and“CALALERT”using[CHUp]/[CHDown]/
[MDCUp]/[MDCDown].
After selection, push this key again to enter the transceiver
alias or message channel selection mode.
➥ While in the transceiver alias or message channel selection
mode, push to return to the MDC menu selection mode.
MDC UP AND DOWN KEYS (MDCoperationonly)
➥PushtoselecttheMDCmenuafterpushing[MDCCALL].
➥ Push to select the desired transceiver alias or message chan-
nel while in the transceiver alias or message channel selec-
tion mode.
MDC SELCALL KEY (MDCoperationonly)
Push to enter the transceiver alias selection mode.
•Afterthedesiredaliasselection,push[PTT]totransmitaselectivecall.
MDC CALLALERT KEY (MDCoperationonly)
Push to enter the transceiver alias selection mode.
•Afterthedesiredaliasselection,push[PTT]totransmitacallalert.