Icom VHF IC-F50

31
4
BIISOPERATION
■ Position data transmission
WhentheoptionalOPC-966i n t e r f a c e c a b l e and a GPS receiver
isconnectedtothetransceiver,theposition(longitudeandlatitude)
data can be transmitted automatically.
Ask your dealer or system operator for connection details.
The position data is transmitted when;
•Status24messageisreceived
 *Whenthestatus24message,GPSrequest,isreceived.
•Fullyautomatic
When automatic position transmission is enabled, send the po-
sition data according to ‘Time Marker’ and ‘Interval Timer’ set-
tings.
•PTTisreleased
When ‘Send with Logoff’ is enabled.
- Set the “Log-In/Off” item as “L-OFF”.
•Aftersendingastatusmessage
When ‘Send with Status’ is enabled.
•AftersendinganSDM
When ‘Send with SDM’ is enabled.
•Aftersendingstatus22(Emergency)
When ‘Send with Emergency’ is enabled.
■ Printer connection
WhentheoptionalOPC-966i n t e r f a c e c a b l e is connected to the
transceiver, a printer can be connected to print out the received
SDM content and the ID of the station who sent the message.
Ask your dealer or system operator for connection details.