Icom VHF IC-F50

30
4
BIISOPERATION
4
■ Transmitting an SDM
D General
The short data message, SDM, can be sent to an individual station
orgroupstations.Also,8SDMmemorychannelsareavailableand
the messages can be edited via PC programming.
D Transmitting an SDM
qWhileinthestandbycondition,push[P1](Digital),thenpush
[
]/[ ]toselectthedesiredstation/groupcode.
wPush[P1](Digital)again,thenpush[
]/[ ]toselectthe
desired SDM.
 Or,youcanselectthedesiredSDMusing[StatusUp]/[Status
Down]keydirectly.
SDM is displayed.
ePush[P0](Call)or[PTT]*totransmittheSDMtotheselected
station/group.
 *PTTcallcanbemadeonlywhenPTTcallcapabilityispermitted.
 •2beepswillsoundandthetransceiverreturnstothestandbycon-
dition automatically when the transmission is successful.