Icom VHF IC-F50

24
4
BIISOPERATION
4
D Calling back from the queue channel
qWhileinthestandbycondition,push[P1](Digital)for1sec.to
enter queue memory channel selection mode.
w Push [
]/[ ]toselectthedesiredrecord.
ePush[P0](Call)or[PTT]*tocall.
 *PTTcallcanbemadeonlywhenPTTcallcapabilityispermitted.
NOTE: When no answer back is received, the transceiver re-
peatsthecall3times(default)automatically,and
“ ” is
displayed during each call. However, an error beep sounds
and
“ ” is displayed when no answer back is received
after the calls.
rPush[PTT]totransmit;releasetoreceive.
tPush[P3](Moni(Audi))tosendthe“Cleardown”signal.