Icom VHF IC-F50

13
3
CONVENTIONAL OPERATION
■ Call procedure
Whenyoursystememploystonesignalling(excludingCTCSSand
DTCS),thecallproceduremaybenecessarypriortovoicetrans-
mission. The tone signalling employed may be a selective calling
systemwhichallowsyoutocallspecicstation(s)onlyandprevent
unwanted stations from contacting you.
qSelectthedesiredTXcodechannelor2/5-tonecodeaccording
to your System Operator’s instructions.
 •Thismaynotbenecessarydependingonprogramming.
 •Refertopages15and16forselection.
wPush[Call](assignedtooneofthedealerprogrammablekeys).
eAftertransmittinga2/5-tonecode,theremainderofyourcom-
munication can be carried out in the normal fashion.
Selective calling
Non-selective calling