Icom VHF IC-F50

23
4
BIISOPERATION
■ Transmitting a call
Totalofa3waysforcodeselectionareavailable—selectingthe
call code from memory, entering the call code from the keypad and
calling back from the queue channel record.
D Using call memory
qWhileinthestandbycondition,push[P1](Digital)toenterthe
call code memory channel selection mode.
Call code text is displayed.
w Push [ ]/[ ]toselectthedesiredcallcode.
ePush[P0](Call)or[PTT]*tocall.
 *PTTcallcanbemadeonlywhenPTTcallcapabilityispermitted.
NOTE: When no answer back is received, the transceiver re-
peatsthecall3times(default)automatically,and
“ ” is
displayed during each call. However, an error beep sounds
and
“ ” is displayed when no answer back is received
after the calls.
rPush[PTT]totransmit;releasetoreceive.
tPush[P3](Moni(Audi))tosendthe“Cleardown”signal.