Icom VHF IC-F50

29
4
BIISOPERATION
■ Transmitting a status
D General
The status message can be selected with the programmed text,
and the message text is also displayed on the function display of
the called station.
Upto24statustypes(1to24)areavailable,andthestatusmes-
sages22and24havedesignatedmeanings.
Status22:Emergency*
Status24:GPSrequest
*Thestatus22canalsobeusedasanormalstatusmessagebydis-
ablingthedesignatedmeaning.However,thestatus24isxed.
The status call can be sent with both individual and group calls.
D Transmitting a status
qWhileinthestandbycondition,push[P1](Digital),thenpush
[
]/[ ]toselectthedesiredstation/groupcode.
wPush[P1](Digital)again,thenpush[
]/[ ]toselectthe
desired status message.
Or, you can select the desired status message using [Status
Up]/[StatusDown]keydirectly.
Status message is displayed.
ePush[P0](Call)or[PTT]*totransmitthestatusmessagetothe
selected station/group.
*PTTcallcanbemadeonlywhenPTTcallcapabilityispermitted.
•2beepswillsoundandthetransceiverreturnstothestandbycon-
dition automatically when the transmission is successful.