Icom VHF IC-F50

■ Transmitting a call
D Transmitting a Selective Call
Selective calling allows you to make a call to a specific station or
toaparticulargroup.OtherMDC1200transceiversonthechannel
will not receive a selective call that does not match their station or
group ID’s.
qPush[MDCCall]toentertheMDCmenuselectionmode.
 •Orpush[MDCSelcall]toenterthetransceiveraliasselectionmode.
In this case, skip step w.
wPush[MDCCall]againtoenterthetransceiveraliasselection
mode.
eSelectthedesiredaliasusing[CHUp],[CHDown],[MDCUp]or
[MDCDown].
rPushandhold[PTT]totransmittheselecivecalltotheselected
station, then speak into the microphone.
tRelease[PTT]toreceive.
35
5
MDC1200OPERATION