Icom VHF IC-F50 - Page 43

36
5
MDC1200OPERATION
5
D Transmitting a Call Alert
Call Alert allows you to notify another user who may be away from
the transceiver that you want to talk.
qPush[MDCCall]toentertheMDCmenuselectionmode.
 •Orpush[MDCCallAlert]toenterthetransceiveraliasselection
mode. In this case, skip steps w and e.
wSelect“CALALERT”using[CHUp],[CHDown],[MDCUp]or
[MDCDown].
ePush[MDCCall]againtoenterthetransceiveraliasselection
mode.
rSelectthedesiredaliasusing[CHUp],[CHDown],[MDCUp]or
[MDCDown].
tPush[PTT]totransmitthecallalerttotheselectedstation.
 •“CACALL”isdisplayed.
yRelease[PTT].
 •“CAOK”isdisplayedifthetargetedstationreceivedthealert.
 •“CAFAIL”isdisplayedifthetargetedstationdoesnotsendanac-
knowledgement.
u After a specified time period has passed, the transceiver will re-
turn to receive.