Icom VHF IC-F50

54
7
SPEAKER-MICROPHONE
■ Attachment
Attachtheconnectorofthespeaker-microphoneintothe[SPMIC]
connector on the transceiver and tighten the screw.
Coin
Screw
IMPORTANT: KEEPthe[SPMIC]jackcoverattached(trans-
ceiver)whenthespeaker-microphoneisnotinuse.Waterwill
not get into the transceiver even if the cover is not attached,
however,theterminals(pins)willbecomerusty,orthetrans-
ceiver will function abnormally if the connector becomes wet.
7
CAUTION: Attach the
speaker-microphone’s
connector securely to
prevent accidental drop-
ping, or water intrusion
in the connector.