Icom VHF IC-F50

20
4
BIISOPERATION
4
■ Receiving a call
D Individual call
q When an individual call is received;
 •Beepssound.
 •“ ” appears and the mute is released.
 •Theprogrammedtextmessage(e.g.“ ”)andthecalling
stationID(ortext)isdisplayedalternately,dependingontheset-
ting.
 •“ ” appears or blinks depending on the setting.
Appears or blinksAppears
wPushandhold[PTT],thenspeakintothemicrophoneatanor-
mal voice level.
 •Transmit/Busyindicatorlightsred.
eRelease[PTT]toreturntoreceive.
 •Transmit/Busyindicatorlightsgreenwhilereceivingasignal.
rTonishtheconversation,push[P3](Moni(Audi))tosendthe
“Clear down” signal.
 •Eitherstationcansendacleardownsignal.
 •“ ”isdisplayedforapproximately2sec.
 •“ ” disappears and the transceiver returns to the standby condi-
tion.