prox.pad Installation/Programming Manual
Table 3: IEI-Supplied Parts/Optional Items
Quantity Description
1 Keypad/control unit assembly, with Prox Sensor, Backplate, hex socket screw
1 Filler Piece/REX Button
1 Press to Exit Label
4 Wall Anchors
4 Mounting Screws
1 Antenna Backplate for remote mounting
1 Silicone Rubber “dogbone”
4 Self-Adhering Pads (for glass mounting)
1 Installer Guide
1 CD-ROM containing instruction manuals
4 Cable Assemblies
1 Tamper Screw
Optional Items
1 Data Collection Device (to capture user list and transaction event log)
1 prox.pad Replacement Battery: Panasonic BR1225, Renata CR1225 or Varta CR1225;
Refer to caution below.
lots of 25 only ProxKey Keytags (IEI part number 0297301)
lots of 25 only ProxCard II Cards (IEI part number 0297401)
Page 18 of 86 Document # 6055676, Rev 2.2, D4b
Caution: Replace battery with types listed above only. Use
of another battery may present risk of fire or explosion.
Battery may explode if mistreated. Do not recharge,
disassemble or dispose of battery in fire.
To Next Page
Loading...
Need help?
General
