IEI Technology prox.pad User Manual

prox.pad Installation/Programming Manual
2.7.4.c Programming the Propped Door Audio Alert
You can program the local sounder on the keypad to operate as the Propped Door output in addition to or instead of the Aux Relay.
This feature is enabled by default. Use the following command sequence to enable or disable this feature:
1. Enter Program Mode.
Press: 99 # Master Code *
The yellow LED flashes slowly.
2. To enable the propped door audio alert, press: 30 # 6 # 1 # **
The yellow LED continues to blink slowly.
To disable the propped door audio alert, press: 30 # 6 # 0 # **
The yellow LED continues to blink slowly.
3. Exit Program Mode.
Press: *
2.7.4.d Programming the Forced Door Audio Alert
You can program the local sounder on the keypad to operate as the Forced Door output in addition to or instead of the Aux Relay.
This feature is enabled by default. Use the following command sequence to enable or disable this feature:
1. Enter Program Mode.
Press: 99 # Master Code *
The yellow LED flashes slowly.
2. To enable this feature, press: 30 # 5 # 1 # **
The yellow LED continues to blink slowly.
To disable this feature, press: 30 # 5 # 0 # **
The yellow LED continues to blink slowly.
3. Exit Program Mode.
Press: *
Page 44 of 86 Document # 6055676, Rev 2.2, D4b

IEI Technology prox.pad Specifications

General

Brand	IEI Technology
Model	prox.pad
Category	Keypad
Language	English