IFM Electronic AL1122 - Identity Object (Object Class: 0 X01)

90
ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 8 Ports IP 65 / IP 67 (AL1122) 2017-05-31
Appendix
>
Identity Object (object class: 0x01)
23119
The Identity Object contains the general information about the device.
>
Class attributes
23648
Attr. ID
Access
Name
Data type
Description
Value
1
Get
Revision
UINT
Revision of the object
1
2
Get
Max instance
UINT
Max. number of instances of the object
1
6
Get
Maximum ID Number
Class Attributes
UINT
ID of the last class attribute
7
7
Get
Maximum ID Number
Instance Attributes
UINT
ID of the last instance attribute
9
>
Instance attributes
23649
Attr. ID
Access
Name
Data type
Description
Preset
1
Get
Vendor ID
UINT
Manufacturer ID
322
2
Get
Device type
UINT
Type of unit
12
3
Get
Product code
UINT
Identification of a particular product of a vendor
AL1122
4
Get
Revision
STRUCT
Revision of the article that is represented by the
Identity Object
1.1
 Major
revision
USINT
Main revision (1...127)
1
 Minor
revision
USINT
Side revision (3 digits, if necessary with zeros in the
beginning)
1
5
Get
Status
WORD
Status of the device
6
Get
Serial number
UDINT
Serial number of the device
7
Get
Product Name
SHORT
STRING
Readable device designation (max. 32 ASCII
characters)
IO-Link Master SL
EIP 8P IP67
8
Get
State
USINT
Current status of the device (according to status
transition diagram)
0
Nonexistent
1
Device Self Testing
2
Standby
3
Operational
4
Major Recoverable Fault
5
Major Unrecoverable Fault
6...254
Reserved
255
Default for Get_Attributes_All service
9
Get
Configuration
Consistency
Value
UINT
The content shows the configuration of the device
0