IFM Electronic AL1122 - Reset IO-Link Master to Factory Settings

39
ifm Operating Instructions IO-Link Master with EtherNet/IP interface StandardLine 8 Ports IP 65 / IP 67 (AL1122) 2017-05-31
Configuration
>
8.2.6 Reset IO-Link master to factory settings
12740
When resetting the AL1122, all parameters are reset to the → Factory Settings (→ p. 60)
To reset the device to factory settings:
► Select [Setup] menu.
> The page shows the current settings.
► Click on [Factory Reset] to reset the AL1122.
> LR DEVICE sets the AL1122 factory settings.