GETTING STARTED
DMS3-CTC-25-115 v1.0
9
1
WAN LED (if you are using the local router scenario)
Internet LED
Ethernet LED
Wireless LED
WPS LED
For more information about WPS, see “3.1 Connecting your wireless client via WPS” on page 19.
Colour State Description
Green Solid on Connected to the WAN device
Off Not connected to the WAN device
Colour State Description
Green Solid on Connected to the Internet, no activity.
Blinking Connected to the Internet, sending/receiving data.
Red Solid on Failed to setup the Internet connection.
Off No Internet connection.
Colour State Description
Green Solid on Network device(s) connected to the Ethernet switch.
Blinking Network device(s) connected to the Ethernet switch and
sending/receiving data.
Off No Ethernet connection on your local network
Colour State Description
Green Solid on The wireless interface is enabled, no wireless activity.
Blinking The wireless interface is enabled, wireless activity.
Off The wireless interface is disabled.
Colour State Description
Green Solid On Client successfully registered via WPS.
Orange Blinking WPS registration ongoing.
Red Blinking Error occurred.
To Next Page
Loading...
