18
WIRELESS NETWORKING
DMS3-CTC-25-115 v1.0
3
3 Wireless networking
Introduction
This section will help you set up your wireless network for your wireless devices.
What you need to set up a wireless network
To set up a wireless network, you need the following components:
A Wireless access point (already integrated into your TG-1 Gateway)
A Wireless client the device that you want to connect (for example, a computer, smartphone, network
printer,...)
Wireless access point
The wireless access point:
Connects your wireless devices to the TG-1 Gateway (and its services).
Allows you to secure the data sent over wireless connection.
The TG-1 Gateway comes with two integrated IEEE 802.11n wireless access point.
The main access point that allows you to connect you home network devices.
The guest access point is disabled by default. If you turn it on you can provide wireless Internet access
to guests. For more information see “3.5 Using the guest access point” on page 27.
Wireless client
The wireless client allows you to connect a device, typically a computer, to a wireless access point. Both
built-in and external (for example via USB) clients are available.
Check the documentation of your device if you are not sure if your device is equipped with a wireless client.
Configuring your wireless clients
For more information on how to establish a wireless connection to the TG-1 Gateway, see:
“3.1 Connecting your wireless client via WPS” on page 19
“3.2 How to manually connect a wireless client” on page 21
Secure your wireless connection!
By default, the TG-1 Gateway secures your wireless data with WPA2-PSK encryption.This is the most
secure encryption type that is currently available.
The wireless key used to encrypt the data is a unique sequence of ten random characters. You can find
your wireless key on the bottom label of your TG-1 Gateway.
If you want to make changes to the security settings, see “3.4 Changing the wireless security settings” on
page 24.
Devices like tablets, smart TVs and smartphones usually have a built-in wireless client. Check the
documentation of your device for more information.
To Next Page
Loading...
