iiNet TG-1 - Configuring WPA-PSK Encryption

WIRELESS NETWORKING
DMS3-CTC-25-115 v1.0
25
3
3.4.1 Configuring WPA-PSK encryption
Procedure
Proceed as follows:
1 Browse to the The TG-1 Gateway GUI.
For more information, see “4.1 Access from your local network” on page 29.
2 Click Wireless. The Wireless page appears.
3 In the Security Mode list under Access Point, select one of the following modes:
 WPA-PSK + WPA2-PSK
 WPA2-PSK
For more information, see “Encryption types” on page 24.
4 In the Wireless Password box, type a the key of your choice. The key must be in one of the following
formats:
 8 to 63 alphanumeric characters. For example: MyKey123
 8 to 64 hexadecimal characters (characters from 0 to 9 and from A to F). For example: C54F48A5.
5 Click Save.
6 Reconnect your wireless client(s) to the TG-1 Gateway using these new security settings.
For more information, see “3.1 Connecting your wireless client via WPS” on page 19 or “3.2 How to
manually connect a wireless client” on page 21.