iiNet TG-1 - 2.4 Setting up your telephone network

16
SETUP
DMS3-CTC-25-115 v1.0
2
2.4 Setting up your telephone network
Procedure
To set up your telephone network, follow these steps:
1 Connect your corded phone, DECT base station or fax to the green Phone port(s) on the back panel of
your TG-1 Gateway.
2 Optionally, you can connect your TG-1 Gateway to the traditional network as a fall-back solution when
the Internet connection is down.To do this, connect the PSTN port to the Phone output of your filter or
splitter.