iiNet TG-1 - 3.2 How to manually connect a wireless client

WIRELESS NETWORKING
DMS3-CTC-25-115 v1.0
21
3
3.2 How to manually connect a wireless client
Procedure
To connect a wireless client (for example, a computer) to the wireless network, configure that wireless client
with the wireless settings (network name and wireless key) used by the access point.
If your TG-1 Gateway is still using the default wireless settings, use network name (SSID) and wireless key
that is printed on the TG-1 Gateway's bottom panel label.
You can always find back the wireless settings via the TG-1 Gateway GUI. For more information, see
“Forgot your wireless key?” on page 58