20
WIRELESS NETWORKING
DMS3-CTC-25-115 v1.0
3
Troubleshooting
If you are having trouble connecting your wireless client via WPS, this may be caused by one of the
following reasons:
WPS can not be correctly executed:
Try again later and if the problem persists, configure your wireless manually. For more information, see
“3.2 How to manually connect a wireless client” on page 21.
Your wireless client is out of range:
If possible move your wireless client closer to your TG-1 Gateway or use a wireless repeater to extend
the range of your wireless network and try again.
Another device is interfering on the selected wireless channel:
Change the radio channel of your TG-1 Gateway access point and try again. For more information, see
“Change the wireless channel” on page 59.
To Next Page
Loading...
