The StellarMate Plus Manual
328 / 341
17.22. Can I add a Real-Time Clock?
StellarMate Gadget already ships with RTC clock configured and ready to
go. For users of StellarMate OS running on their RPI3/RPI3B+, you can
purchase a DS3231 module and install it. There is no need to perform any
additional software configuration as StellarMate OS supports DS3231
natively.
17.23. Cannot connect to DSLR camera?
The following is a list of checks you need to verify before contacting
support regarding DSLR connectivity issues:
· Make sure the camera battery is full.
· Make sure there is enough space on your SD card.
· Make sure the camera is set to Bulb/Manual mode. In some models,
you need to rotate the dial first to Manual then change the settings to
make it Bulb.
· Turn off any power-saving features in the camera that might be
making the camera go to sleep mode without your knowledge. Some
cameras support inactivity timer, try to set it to 10 or 15 minutes to
be on the safe side.
· Try a different USB cable.
· Try plugging the camera to a different USB port on StellarMate.
If none of the above works out, please submit a support ticket with details
on your setup.
17.24. Can I hook up an external USB drive for storing images and videos?
Absolutely. After you connect the external USB drive. You need to login to
StellarMate OS desktop either via VNC or HDMI. You should see the
To Next Page
Loading...
