Image Access WideTEK 25 User Manual

Page 28 Manual
A.12.6.1 IP Address
Touch the control field IP Address. The touch panel changes to the Network setup
screen.
Picture 14: Network setup
Touch on the line to be changed, e.g. the Address line. The touch panel shows:
Picture 15: Numeric key pad
Enter the new values. The < and > keys move the cursor, the X key deletes the number at
the cursor position.
To finalize the input, tap on the checkmark key.
If entries have been changed, a screen opens where the changes must be confirmed.
Yes confirms the changes, No discards the changes.
Picture 16: Confirm changes
After the changes have been saved, the setup screen is displayed again.

Image Access WideTEK 25 Specifications

General

Brand	Image Access
Model	WideTEK 25
Category	Scanner
Language	English