Image Access WideTEK 25 - B.5.2.3.3 Volume

Manual Page 97
B.5.2.3.3 Volume
Click the button Volume to set the loudspeakers volume of the scanner.
Picture 90: Volume level
A screen opens and shows a graphic to symbolize the volume.
Click on the percentage value to change the volume level. The color of the graphic will
change depending on the selected volume level.
Volume level
Volume bar color
Up to 30%
Green
40% to 60%
Yellow
70% or higher
Red
To return to the Login screen (Picture 83) click the button
Setup Menu
To return to the USER screen (Picture 84) click the button Back to Main Menu .
Click the button Launch Scan Application to switch directly to the main screen of the
integrated S2N user interface.