Image Access WideTEK 25 User Manual

Manual Page 93
B.5.2.2 Operation Info Screen
In the section Information click the button Operation Info and the following list will show
various scan counters and elapsed times.
Picture 86: Operation Info screen
The following table gives a brief description.
Field Description
Total Scan Count
The total number of scans performed since the scanner left
the factory. Each CCD scan cycle is counted.
Total Power Up Cycles
The total number of power up cycles performed since the
scanner left the factory. This function counts the start/stop
button invoked cycles only.
Total Operating Time
The total operating time since the scanner left the factory.
This is the on-time only, standby time does not count.
Lamp Operating Time
The total lamp operating time since the scanner left the
factory. This is the on-time including dimmed lamp periods.
Remaining Lamp Operating
Time
The typical remaining lifetime of the lamps. T
he lamps
usually last for the complete lifetime of the device.
To return to the USER screen (Picture 84) scroll down completely and click the
button Back to Main Menu or click on the “Return” button in your browser.
To return to the Login screen (Picture 83) click the button
Setup Menu
Click the button Launch Scan Application to switch directly to the main screen of the
integrated S2N user interface.

Image Access WideTEK 25 Specifications

General

Brand	Image Access
Model	WideTEK 25
Category	Scanner
Language	English