B.2 Setup Menu
Click in the start screen on the button Setup Device .
The next screen shows three buttons to select the login level. The access to the levels
Poweruser and Admin are password protected.
Picture 33: Login level screen
B.2.1 Selecting the Login Level
User This level allows the user to get some status information of the
WideTEK 36 scanner. This are e.g. the firmware version, the remaining
lamp operating time, system information, and many more. Furthermore it
allows to set a few basic parameters.
Poweruser Password protected level. Allows to set an extended range of system
parameters and to execute some adjustments.
Admin Password protected. Allows to set a wide range of system parameters and
to configure the scanner in detail.
Access to the Admin level is limited for trained technicians.
Setup and Assembly Manual Page 35
To Next Page
Loading...
