Image Access WideTEK 36 Setup And Assembly Manual

B.3.2 Adjust Time & Date
In the Poweruser main menu screen (Picture 34) locate the section Base Settings. Click
on the button Adjust Time & Date .
Picture 36: Adjust Time and Date Screen
Select the time format.
Enter in section NTP Server all parameters for the communication with a NTP server.
Select the time zone and the daylight saving function.
Manually set the time and the date.
Click the button Manually to refresh all above modified data.
Click the button via NTP to connect to the above defined NTP server.
Note: By default, the name of a scanned image contains the scan time and date,
therefore synchronizing the internal clock can be of some value.
Page 38 Setup and Assembly Manual

Image Access WideTEK 36 Specifications

General

Brand	Image Access
Model	WideTEK 36
Category	Scanner
Language	English