A20733 B0 127
Technical specifications
• Standard accessories
- Head support stand
- Object detector
- Tachometric generator
- External alarm (girolamp or siren)
- Head protection
- Transport trolley
- Head movement
• Main operating characteristics
- counting of individual objects or batches,
- full autodating,
- variable message library,
- logo printing (15 logos/jet)
- special characters: "Chimney", transversal and longitudinal "DIN"
- non-doubled printing of a given message
- programmable print delays
- controlled by operator interface or any system with a serial interface
- auto-diagnosis of printer status
- automatic ink viscosity regulation
- automatic nozzle unclogging system
- automatic rinsing and flushing of printer
- automatic nozzle rinsing (depending on configuration)
- pressurized print head(s)
• Performance parameters
• Printing:
- On any support, in all positions
- Up to 1024 characters per message
- 1 to 2 lines per jet (1 to 4 variable lines per jet on serial link)
- One single-jet head
- Choice of character fonts: 5, 7, 9, 11, 16, and 24 dots
- Possibility of printing all types of characters and graphics
- National characters: Arabic, Norwegian, Swedish, Spanish, Greek, Cyrillic, Hebrew
- Inversion of character reading and printing directions
•Headtoobjectdistance:
- G head: 10 mm (0.39") or 30 mm (1.18") depending on font used
- M head: 8 mm (0.32") or 20 mm (0.79") depending on font used
• Max. speed :
- G head: up to 5.4 m/s (1063 ft/mn) depending on font used
- M head: up to 3.6 m/s (708.7 ft/mn) depending on font used
To Next Page
Loading...