A20733 B0 91
Servicing
3.2.7 Restarting the printer after rinsing with the tool
This procedure involves two phases:
1) Replacing the ink filter cartridge.
2) Refilling with ink.
Replacing the ink filter cartridge:
Open the main filter, remove the old cartridge, thoroughly clean the inside of the casing with
fresh cleaning solution, fit a new filter cartridge and reassemble the filter.
Refilling with ink:
After replacing all the drain plugs, fill the ink tank with one liter of ink.
Check the additive level.
Start the printer, checking that the ink jet is present and stable.
- It may be necessary to use the [Stability] function.
- It is essential to use the [Refresh] function for 5 minutes.
To Next Page
Loading...