29
INSTALLER
USERMAINTENANCE TECHNICIAN
TECHNICAL DATA
1.13 IMMERGAS FLUE SYSTEMS
For the types of installation of the ue systems approved for this product, scrupulously follow what is indicated in the table in
paragraph 4.3, in the “type of appliance” line.
Immergas supplies various solutions separately from the appliances regarding the installation of air intake and ue exhaust terminals,
which are fundamental for appliance operation.
ese solutions form an integral part of the product.
e appliance must be installed with an original Immergas "Green Range" inspectionable air intake system and ue gas extrac-
tion system made of plastic, with the exception of conguration C
6
in the congurations envisaged in Parag. 1.12, as required by
the regulations in force and by the product’s approval. is ue can be identied by an identication mark and special distinc-
tive marking bearing the note "only for condensation boilers".
For non-original ue system, refer to the technical data of the appliance.
e plastic pipes cannot be installed outdoors, for tracts longer than 40 cm, without suitable protection from UV rays and other
atmospheric agents.
To Next Page
Loading...
