99
INSTALLER
USERMAINTENANCE TECHNICIAN
TECHNICAL DATA
3.12 PASSWORDPROTECTED SPECIAL FUNCTIONS
e appliance is equipped with some special functions, access to which is granted if this is in stand-by ( ).
If the appliance is connected to the CAR
V2
, the “stand-by” function is only obtained via the remote control panel.
63
Press and hold the “
” button for more than 5 seconds.
e display will show two dashes “--” ashing.
Now enter the password ( ) to access the programming menus.
64
To enter the rst digit use the buttons to adjust the DHW “
”, to enter the sec-
ond digit use the buttons to adjust the central heating temperature “
”.
To conrm the password (69) and access the menu, press the operating mode
button " ".
Once the menu has been accessed, it is possible to cyclically scroll the three available functions (dl, MA, FU) by pressing the DHW but-
tons “
”, to access the menu press the button “ ” to exit wait 15 minutes or press the button “ ”.