Indutherm CC3000 - Main Switch with Emergency Stop Function; Safety Markings on the Unit

Safety
TechDoku_CC1000_VCC1000_CC3000_VCC3000_GenPM_GB_86025010_86025110.doc
2–4
2.3.4 Main switch with emergency stop function
It is allowed to start the machine or operation only with proper emer-
gency stop function.
Caution!
With the emergency stop function you can stop the machine in criti-
cal moments of health hazard. You help to diminish potential con-
sequences of injury.
> Don’t manipulate the emergency stop equipment.
> Don’t obstruct the way to the emergency stop equipment.
2.3.5 Safety markings on the unit
A necessary condition for safe dealing with and undisturbed running
of the machine is the knowledge of safety instructions and industrial
safety regulations.
On the front of the machine casing the following safety markings are
attached.
safety
marking
meaning
safety
marking
meaning
warning of dan-
gerous electrical
voltages
wear heat resistant
safety clothing
warning on hot
surfaces
wear heat resistant
protective gauntlet
gloves protecting
artery
forbidden for
persons with
pacemaker
wear face guard
wear protective
shoes
Advice
Keep the safety markings always clean. Replace the markings if they
aren’t recognizable. Observe the warnings and commands. Don’t
expose yourself careless to dangerous situations.