Indutherm CC3000 - EC-Conformity; Observation of the Product

General
information
TechDoku_CC1000_VCC1000_CC3000_VCC3000_GenPM_GB_86025010_86025110.doc
1–2
Operating company must ensure operating personnel has read and
understood the manual before they are going to use the machine.
Operating company must ensure unauthorized person has no access
to the system.
Maintenance actions may only be done by authorized personnel or by
service technicians from Indutherm.
1.4 EC-conformity
Declaration of European Community conformity is attached to this
manual.
1.5 Observation of the product
The management will provide you with a secure machine at state-of-
the-art.
Please let us know immediately if there are:
 failures at safety measurement devices,
 failures during production,
 modified parameter settings,
 difficulties in using the system,
 accidents or near accidents and
 remarks for improvement of the manual.