Indutherm CC3000 - 1 General Information; Scope of Delivery and Responsibilities; Liability, Warranty and Guarantee; Responsibility of Operating Company

General
information
TechDoku_CC1000_VCC1000_CC3000_VCC3000_GenPM_GB_86025010_86025110.doc
1–1
1 General information
1.1 Scope of delivery and responsibilities
The continuous casting machine (V)CC1000 or (V)CC3000 is deliv-
ered complete. Please check delivery immediately after receiving the
shipment if there are something missing or possible transport damag-
es. Please tell the faults the shipping agency and your dealer.
1.2 Liability, warranty and guarantee
The company INDUTHERM Erwärmungsanlagen GmbH take liability,
warranty and guarantee according to the legal regulations.
The continuous casting machine is built to be state-of-the-art and in
compliance with the accepted safety regulations. Nevertheless, can
improper installation and non-intended using lead to danger and
damages.
INDUTHERM Erwärmungsanlagen GmbH don’t take liability for dam-
age caused by untrained personnel operating the machine.
For damages because of demonstrably misusing of machine or be-
cause of abnormal behaviour no liability will be taken by IN-
DUTHERM Erwärmungsanlagen GmbH!
INDUTHERM Erwärmungsanlagen GmbH don’t take liability for dam-
ages caused by faulty protection of power supply and/or wrong con-
necting the supplies (protective gas, water, compressed air).
There is no guarantee for consumables by INDUTHERM Erwärmung-
sanlagen GmbH.
Company INDUTHERM Erwärmungsanlagen GmbH cannot and will
not take responsibility for all consequential damages caused by
above mentioned circumstances.
This operating manual is of the technical state at printing date. All
rights reserved regarding technical changings and different equip-
ment.
Damages caused by disregard, wrong interpretation and non-
compliance with specifications in this manual will lead to expiration of
guarantee for this system.
1.3 Responsibility of operating company
The operator must meet with the national accident preventing regula-
tions and technical regulations.
Operating company is allowed to let operate machine by trained and
trustworthy personnel only.
Operating company must make sure the system is supervised when
there is training at this device.
Operating manual must be kept right next to the system.