Indutherm CC3000 - Residual Risks; Behaviour in an Emergency

Safety
TechDoku_CC1000_VCC1000_CC3000_VCC3000_GenPM_GB_86025010_86025110.doc
2–10
Caution!
Danger for health because of inhalation of fibre particles.
 Store crucible shield and insulation in dustproof package.
 Remove the material just before installation.
 Don’t shatter crucible shield and insulation.
 Pack the materials immediately after removal dustproof and dis-
pose the materials in this packaging
2.6 Residual risks
risk characterisation
risk reduction
Health risk for persons with
cardiac pacemaker who ap-
proach the running system.
Instruct people.
Burn injury on hot surfaces or
hot molten metal.
Teach people. Wear personal pro-
tective equipment.
Danger of explosion because of
dripping of liquid metal in a wa-
ter filled steel tub during melting
of aluminium or aluminium-
alloys.
Fill the tub with sand.
Jet flame or explosion when
opening the lid of the melting
chamber in case of melting
without protective gas.
Always melt with protective gas
at temperatures above 500 °C.
Tilting and toppling of the sys-
tem due to improper transporta-
tion.
Consider shipping instructions.
2.7 Behaviour in an emergency
The personnel working at the facility must be trained about the behav-
iour in an emergency.
All persons who are working with the machine must be informed of
the possibility of rapid standstill of the plant.