TechDoku_CC1000_VCC1000_CC3000_VCC3000_GenPM_GB_860
25010_86025110.doc
10.7 Consumable and spare parts list
INDUTHERM is now using only machine specific spare parts list, which contain all
the information for your machine.
At following page, the spare parts list for this machine will start.
The item number of the consumables list is composed by following parts:
G (for starter kit/basic equipment)
The next five digits are the machine service number.
The following combination of letters describe the application (please fur-
ther below.
The last two digits are the actual state, starting with ‘_00’.
One example: G17999_VC_00. This is the consumables list of machine no.
17999, equipped as vacuum pressure casting machine with delivery index ‘00’.
At request we can send you the actual consumables list in PDF-format. Is there a
consumable part or replacement piece replaced by an advanced or better one,
changes the index number in the end of item no. in ascending order, in this case to
G17999_CC_01? This list replaces the previous edition with index ‚_00‘. This
should lead to the situation you have always access at the actual consumable and
replacement parts of your machine.
If your machine is equipped with options like sinter or granulating, then there are
for these options specific consumables and spare parts lists.
For ordering of replacement and consumable parts please contact your dealer or
at our order service with telephone number: +49-(0)-7203-9218-40.
Attention:
The numbers like C008 in the consumables list are
placeholder for the position in the machine. The arti-
cle number to order this piece is 8 digits and listed in
your machine specific order list G17999_00.pdf.
To Next Page
Loading...
