Indutherm CC3000 - 9 Dismantling and Cleaning up

Dismantling and
cleaning up
TechDoku_CC1000_VCC1000_CC3000_VCC3000_GenPM_GB_860
25010_86025110.doc
9–1
9 Dismantling and cleaning up
Warning!
Permanent skin damages after touching lubricant or sol-
vent of every description (long term effects).
 Avoid touching lubricants, solvents and coolants.
 Wash the sprinkled skin parts thoroughly.
 Wear protective gauntlets when using lubricants, solvents and
coolants.
Attention!
Disposal possibly inserted lubricants and harmful cleaning
agents are strictly regulated by the Environmental Protec-
tion Act and its regulations.
 Deliver spent lubricants from at the hazardous waste
collection point.
 Spilled lubricants, immediately sprinkle with binder and disposed
of after binding as hazardous.
 Meet catch precautionary, spilled feed materials (sealed bottom,
catch basins, collecting tarpaulins).
> Separate the system off the mains supply and other supply con-
nections.
> Depressurize all system parts which can be under pressure.
> Dispose the system with the help of an appropriate lifting gear.
> Clean the parts of the system.
> Follow legal regulations at handling and cleaning up of old system
parts.
> Bring metal pieces to the recycling.