1-16 General Information
kina22e chapter 1.fm technical handbook(1206)
Holder for SL3000 sniffer line (optional)
An optional holder for the SL3000 sniffer line is available as cat.-no. 525-006. The
holder may be installed on the right or left side of the main unit (for right- or left
handed operators) as shown in Fig. 1-6.
The installation is described in Fig. 1-6. There are two little slots on the front side at
the very top area of the blue square front of the main unit.
Hold the holder horizontally and then insert the two little hooks of the holder into the
two slots (either on the right or the left side).
With the hooks still inserted, let the holder flap down. It will automatically attach to
the metal front by the magnet on the backside of the holder.
Now insert the sniffer probe grip into the opening of the holder and let it sink down
until it rests in the holder.
Fig. 1-5 Usage of sniffer line holder
Fig. 1-6 Installation of sniffer line holder
To Next Page
Loading...
