FLEX iPP320 - Installation Guide_v1.50.docx
o Press F1, the terminal displays (Main menu) screen.
o Select (Configuration) then press the green key, the terminal displays (Configuration)
screen.
o Using F2 or F3 to navigate, select (Term config) and press the green key.
o Select (POS comm) and press the green key.
o Select (Registration) and press the green key.
o The terminal displays (Waiting for POS communication).
o From the Point-of-sale System that you wish to be associated with the Payment
Terminal, initiate a service request while the terminal is displaying (Waiting for POS
communication). Upon receipt of the request, the terminal will display the IP address of
the Point-of-sale System that sent the request, along with the message (Accept?).
o Press F4 to accept the association or F1 to clear the current association and return the
terminal to wait mode.
To Next Page
Loading...
