InHand VG710 InVehicle Gateway User Manual
41
5.6.2.1 RIP
The Routing Information Protocol (RIP) is a simple internal dynamic routing protocol mainly used on
small-scale networks.
Method for enabling dynamic routing between VG710_A and VG710_B over RIP in the
scenario:
1. Configure VG710_A. Click "Routing >> Dynamic Routing >> RIP", check "Enable", and configure
VG710_A in the "Network" bar to announce the routing entry of VG710_A.
2. Configure VG710_B.
To Next Page
Loading...
