page 76 innovaphone IP DECT
All non-virtual interfaces additionally have the Registration section after selec-
tion of the registration method.
The entry fields for an H.323 registration are:
Gatekeeper
Address (pri-
mary)
The primary gatekeeper IP address at which the inter-
face is to register. If the primary gatekeeper is located on
the same device, the local IP address 127.0.0.1 can
also be entered here.
Gatekeeper
Address (secon-
dary)
The secondary gatekeeper IP address at which the inter-
face is to register, if registration with the primary gate-
keeper fails. If the secondary gatekeeper is located on
the same device, the local IP address 127.0.0.1 can
likewise be entered here.
Gatekeeper ID It is also sufficient to specify only the Gatekeeper ID (see
also the chapter entitled “
Administration/Gateway/Gene-
ral
”).
Name The unique, descriptive H.323 name of the interface or
registration.
Number The unique E.164 call number of the interface or regi-
stration.
Password /
Retype
The security of the registration can be raised by spe-
cifying a password (Password). The password must be
confirmed (Retype).
Supplementary
Services (with
Feature Codes)
A checked check box enables the use of additional fea-
tures (Feature Codes).
See description in the chapter entitled “
Administration/
Gateway/General
”.
Dynamic Group A
dynamic group
can be added to the H.323 registration.
Groups can be configured as
static
,
dynamic-in
or
dyna-
mic-ou
t. For members of static groups, calls are always
signalled. It works differently for members of dynamic
groups, which register with or unregister from a group
dynamically using a function key (Join Group). The diffe-
rence between
dynamic-in
and
dynamic-out
lies in whe-
ther the object is to be contained in the relevant group
as standard (
in
) or not (
out
).
See also description in the chapter entitled “
Administra-
tion/PBX/Objects
”.
To Next Page
Loading...
