CUSA
®
Clarity Ultrasonic Surgical Aspirator System Operator’s Manual
9-3
Priming the System
NOTE
The prime cycle ends automatically; however, if necessary, the cycle
may be stopped at any time by selecting the Stop Prime button.
2. Make sure the irrigation tubing is lled with irrigation uid, and the
irrigation uid ows from the tip.
3. If uid does not ow from the tip after one prime cycle, select the
Start Prime button again.
If irrigation uid does not ow from the handpiece tip after several prime
cycles, see “Irrigation Troubleshooting” on page 13-5.
Stop Prime
To stop priming the system, during the priming cycle, select the Stop
Prime button (the Start Prime button changes to a Stop Prime button
during the priming cycle).
To Next Page
Loading...
