Integra CUSA Clarity - Changing Tips During Surgery; Section Overview; Quick Reference: Changing Tips

Changing Tips in the Sterile Field
During a Surgical Procedure
SECTION 10
In this section:
• Overview on page 10-1
• Quick Reference: Changing Tips on page 10-1
• Changing a Tip on page 10-2
This section describes the procedures for changing tips during surgery
while in the sterile eld.
Overview
Quick Reference: Changing Tips
1. Put the system in standby.
2. “Removing the Used Tip” on page 10-2.
3. “Assembling the New Tip on the Handpiece” on page 10-6.
4. Test and prime the handpiece again.