CUSA
®
Clarity Ultrasonic Surgical Aspirator System Operator’s Manual
10-4
Changing a Tip
5. Slide the nosecone off the tip.
6. Place the handpiece on the torque base as shown and make sure that
the 2 at metal sides t snugly in the metal slot at the end of the base.
7. Hold the handpiece in the base and place the torque wrench (color
side towards handpiece) over the tip.
CAUTION
To avoid product damage, always use the torque base to hold the
handpiece while using the torque wrench to tighten or loosen the tip.
Avoid over torqueing the tip.
To Next Page
Loading...
