To Next Page

To Previous Page

Connections

En-15

Bi-amping the Front Speakers

Bi-amping provides improved bass and treble performance.

When bi-amping is used, the AV controller is able to drive up to a 5.1 speaker system in the main room.

Perform bi-amping connections by using front jacks and surround back jacks as shown below.

Once you’ve completed the bi-amping connections and turned on the AV controller, you must set the speaker setting to enable bi-amping (➔ page 63).

See your multichannel power amplifier’s instruction manual for more information on connecting speakers.

■ Connection via RCA Jacks ■ Connection via XLR Jacks

Important:

• When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.

• Bi-amping can be used only with speakers that support bi-amping. Refer to your speaker manual.

Tweeter (high)

Front right Front left

Woofer (low)

AV controller

Multichannel

power amplifier