MEDIAJET – Operating instructions V09 Description of the device
10 INTEGRA Biosciences AG
2.1.1 TUBEFILLER option
The TUBEFILLER option (Part No. 103 010) converts the MEDIAJET into a test
tube filler.
10 pack O-rings (MEDIAJET vario with biplate
option only)
(Part No. 113 822)
Carousel, in a separate box
(Part No. 103 020, 103 021, 113 022, 113 020
or 113 021)
Support plate, can accommodate 3 test tube
racks.
Filling arm, consisting of carrier piece (1), rod
(2) and radial arm (3).
Silicone tubing set, consisting of silicone tubing
3.0 mm ID, 2.5 m length, stainless steel
aspirating and dispensing tube, each of 10 cm
length.
To Next Page
Loading...
